NBA 2K27 Custom Jumper Finder

  1. Premium
Attempt 1 of 10

Release 10 shots within the green zone with timing that feels right to you. The timing must be within the green lines.

The green band runs from 500 to 750 milliseconds, and you can move either end with the sliders above. The fastest tested shot greens at 539 mS, so there is nothing to find below roughly 500, and a release slower than 750 is generally too slow to be worth using.

Use Bluetooth to Connect a Controller to Your Phone or a USB Cable to connect your controller to a computer.

How to Get a Jump Shot Recommended

Set your height and 3PT rating first, because between them they decide which tested shots you can actually use.

Connect your controller via Bluetooth or USB. Press and hold the shoot button (X or Square) to start the meter, and release it at the moment that feels right to you. There is no single correct answer here: you are telling us the timing you like shooting at, and we find the shots built around it.

The green band on the meter is the range with tested shots behind it. Releases inside it count toward your ten attempts; anything outside is ignored rather than interrupting you, and the counter simply will not move. You can move the green range with the two sliders if it does not match how you shoot.

After ten attempts we drop your fastest and slowest release and average the rest, so one mistimed shot cannot skew the result. Your average is shown with the shots we recommend.

A shot is a match when your timing lands anywhere inside its green window, not merely near the start of it. Where several shots fit, the one that greens most often comes first, and a wider window breaks any remaining tie.

Connect Your Controller via Bluetooth
Follow these steps to connect your Xbox or PlayStation controller to your phone.
Xbox Controller
  • 1. Turn On Your Controller: Press the Xbox button to power on your controller.
  • 2. Enter Pairing Mode: Press and hold the Pairing button on the top of the controller until the Xbox button starts flashing rapidly.
  • 3. Open Bluetooth Settings on Your Phone:
    iOS: Go to Settings > Bluetooth.
    Android: Go to Settings > Connections > Bluetooth.
  • 4. Enable Bluetooth: Ensure Bluetooth is turned on.
  • 5. Locate the Controller: Look for "Xbox Wireless Controller" in the list of available devices.
  • 6. Pair the Controller: Tap on "Xbox Wireless Controller" to pair it with your phone. Once connected, the Xbox button will remain lit.
PlayStation Controller
  • 1. Turn On Your Controller: Press the PlayStation (PS) button to power on your controller.
  • 2. Enter Pairing Mode: Press and hold the Share and PS buttons simultaneously until the light bar starts flashing rapidly.
  • 3. Open Bluetooth Settings on Your Phone:
    iOS: Go to Settings > Bluetooth.
    Android: Go to Settings > Connections > Bluetooth.
  • 4. Enable Bluetooth: Ensure Bluetooth is turned on.
  • 5. Locate the Controller: Look for "Wireless Controller" in the list of available devices.
  • 6. Pair the Controller: Tap on "Wireless Controller" to pair it with your phone. Once connected, the light bar will remain lit.

If you are using the tool through a computer browser you can connect your controller with a USB cable.

If the tool is not working for you in Safari, try another browser.